UV AOP

Technical Series: NAOP

Water Reuse

(NAOP Series)

The Neotec UV NAOP Series offers medium-pressure (MP) and low-pressure high-output (LPHO) UV-AOP systems for drinking water treatment and water reuse applications. Selected models have undergone independent third-party UV disinfection validation.

Quartz sleeves are maintained using a mechanical wiper system, with an optional Bubble Clean system that uses microbubbles and water circulation.

Advanced Oxidation Process

The UV-based Advanced Oxidation Process (UV-AOP) combines ultraviolet light with oxidants such as hydrogen peroxide (H₂O₂) to generate highly reactive hydroxyl radicals (•OH). These radicals break down persistent organic contaminants that are difficult to remove by conventional water treatment processes.

UV-AOP can be applied to the treatment of persistent organic contaminants, including 1,4-dioxane, NDMA, pesticides, herbicides, and certain cyanotoxins.
How UV-AOP Works
1. Oxidants such as hydrogen peroxide are added to the water.
2.  Hydroxyl radicals are generated from UV irradiation activating hydrogen peroxide.
3. Hydroxyl radicals react with organic contaminants to break them down.

UV-AOP Target Contaminants

Micropollutants and
Organic Contaminants

1,4-Dioxane
N-nitrosodimethylamine (NDMA)
Atrazine - Metaldehyde
Tetrachloroethylene (PCE)
Taste, Odor Compounds
and Cyanotoxins
2-Methylisoborneol (2-MIB)
Anatoxin
Microcystins
Hydroxyl radicals have a higher oxidation potential than ozone and chlorine, allowing them to break down a broad range of organic contaminants for advanced water treatment and water reuse.

UV-AOP Validations

International Certifications
  • UVDGM (NAOP 6LS-S-24)
  • DVGW / UVDGM (NCM-I)
  • CE (COC / DOC)
  • NSF60 (Cleaning System)
  • UL certification
Domestic Certifications
  • Outstanding R&D Innovation
  • Environmental Assurance
  • Certified Green Product
  • Certified Green Technology
Entrepreneur Certifications
  • Korea Environmental Awards
  • Innovative SMEs (INNO-BIZ)
  • Leading Environmental Company
Registered Patents
  • UV Reactor Optimization
  • Fluid Mixing Technology
  • UV Lamp Development
  • Cleaning Technology

Project References

Illsan WTP (KR)
LP: 125,000 m³/day (33 MGD)
J. Naval Base (KR)
LP: 20,000 m³/day (5.28 MGD)
N. WTP (KR)
MP (I): 2,500m³/day (0.66 MGD)
LP (II): 2,500m³/day (0.66 MGD)
Daegu WIC (KR)
MP: 1,000 m³/day (183.45GPM)
UV-AOP System Diagram
Click parts of a UV AOP system to learn more.
1. Oxidant Storage Tank stores oxidants such as hydrogen peroxide (H₂O₂) for use in the advanced oxidation process.
2. Oxidant Dosing Control Panel controls the oxidant dosing pump and regulates the amount of oxidant injected into the treatment process through the SCP.
3. Power Supply Panel (PSP) supplies power to the UV lamps through electronic ballasts.

The ballasts automatically regulate lamp output according to control signals from the SCP.
4. System Control Panel (SCP) monitors system operating conditions and automatically adjusts UV lamp output and oxidant dosage in response to changes in flow rate and water quality.
5. Flow Meter measures the real-time flow rate of water and transmits the data to the SCP.

The system uses this information to adjust UV lamp output and oxidant dosage according to changing flow conditions.
6. Oxidant Dosing System (Optional) injects oxidants into the water pipeline through a static mixer or diffuser to ensure proper distribution before the water enters the UV chamber.
7. UV Chamber houses the UV lamp modules and provides the treatment space where UV irradiation and oxidation take place.

Constructed from stainless steel 316L, the chamber can be equipped with optional wiper systems, temperature sensors, and UV intensity sensors.
1
2
3
4
6
5
7

Low-Pressure UV AOP Series

NAOP-5(6)LM(LN)-D Series General Features
Chamber Configuration Diamond Type
Module Configuration 24 Lamps per Module
Cleaning System Mechanical Wiper, Manual
Material STS 316 / 316L or Duplex STS 2205
Lamp Type Low-Pressure High Output
Pressure Rating 130 psi (9 bar) or 87 psi (6 bar)
Operating Water Temperature 5°C~45°C (41°F~113°F)
Input Power Per Lamp 550w, 600w
Control Panel General Features
Material Painted Steel / STS 304
Controller Programmable Logic Controller (PLC)
Inputs 4-20mA, Ethernet, RS-485
Outputs Ethernet, RS-485
Voltage / Frequency 360 ~ 480 ±10% / 50/60 Hz
Operating Temperature 0°C~50°C (32°F~120°F)
Location Indoor and Outdoor
Ballast Type Variable Output Electronic Ballast
NAOP-5(6)LM(LN)-T series General Features
Chamber Configuration Topaz Type
Module Configuration 24 Lamps per Module
Cleaning System Mechanical Wiper, Manual
Material STS 316 / 316L or Duplex STS 2205
Lamp Type Low-Pressure High Output
Pressure Rating 130 psi (9 bar) or 87 psi (6 bar)
Operating Water Temperature 5°C~45°C (41°F~113°F)
Input Power Per Lamp 550w, 600w, 960w
Control Panel General Features
Material Painted Steel / STS 304
Controller Programmable Logic Controller (PLC)
Inputs 4-20mA, Ethernet, RS-485
Outputs Ethernet, RS-485
Voltage / Frequency 360 ~ 480 ±10% / 50/60 Hz
Operating Temperature 0°C~50°C (32°F~120°F)
Location Indoor and Outdoor
Ballast Type Variable Output Electronic Ballast

Medium-Pressure UV AOP Series

NAOP-4(6, 8, 10)MM-I Series General Features
Chamber Configuration In-Line Type
Module Configuration 4 to 12 Lamps
Cleaning System Mechanical Wiper
Material STS 316 / 316L
Lamp Type Medium-Pressure
Pressure Rating Up to 145 psi (10 bar)
Operating Water Temperature 5°C~45°C (41°F~113°F)
Input Power Per Lamp 4kW, 6kW, 8kW, 10kW
Control Panel General Features
Material Painted Steel / STS 304
Controller Programmable Logic Controller (PLC)
Inputs 4-20mA, Ethernet, RS-485
Outputs Ethernet, RS-485
Voltage / Frequency 360 ~ 480 ±10% / 50/60 Hz
Operating Temperature 0°C~50°C (32°F~120°F)
Location Indoor and Outdoor
Ballast Type Variable Output Electronic Ballast
NAOP-4(6, 8, 10)MM-U(S) Series General Features
Chamber Configuration U-Type, S-Type
Module Configuration 1 to 12 Lamps
Cleaning System Mechanical Wiper
Material STS 316 / 316L
Lamp Type Medium Pressure
Pressure Rating Up to 145 psi (10 bar)
Operating Water Temperature 5°C~45°C (41°F~113°F)
Input Power Per Lamp 4kW, 6kW, 8kW, 10kW
Control Panel General Features
Material Painted Steel / STS 304
Controller Programmable Logic Controller (PLC)
Inputs 4-20mA, Ethernet, RS-485
Outputs Ethernet, RS-485
Voltage / Frequency 360 ~ 480 ±10% / 50/60 Hz
Operating Temperature 0°C~50°C (32°F~120°F)
Location Indoor and Outdoor
Ballast Type Variable Output Electronic Ballast