UV Disinfection

Technical Series: NOL HM

Open Channel

(NOL Series)

The Neotec UV NOL-HM Series is a Low-Pressure High-Output (LPHO) UV disinfection system designed for open-channel municipal wastewater with internationally validated performance.

Each lamp is individually monitored, with automatic lamp output adjustment based on flow rate and UVT.

The NOL-HM Series is suitable for a variety of applications, including wastewater treatment, sewage treatment, irrigation water, and water reuse.
A mechanical sleeve wiper system periodically removes fouling and deposits that build up on the quartz sleeves during operation. The cleaning frequency can be adjusted through the SCP user interface.

A wiper ring removes deposits from the quartz surface as the wiper assembly moves up and down the sleeves. The assembly is driven by a motorized lead screw, providing reliable and effective cleaning.
The UV intensity sensor is submerged and mounted above the top row of arc tubes within each module. The sensor continuously measures UV intensity and sends the signal to the UV monitor in the SCP, where it is displayed on the user interface and made available for external output connections.

To ensure accurate and reliable measurements, the sensor probe is automatically cleaned along with the quartz sleeves by the automatic wiper mechanism.
UV Sensor
Wiping Mechanism

Key Features

The Neotec UV NOL-HM Series features a modular design and an automatic cleaning system for efficient operation and maintenance.
‍
• High-efficiency LPHO amalgam lamps with extended lamp life
• High-power-factor electronic ballasts
• Individually monitored UV lamps with waterproof connections
• Slim module profile to minimize hydraulic head loss
• Easy lamp replacement with self-standing modules and one-touch connectors
• UL-certified electrical safety
• Optional online mechanical-chemical quartz sleeve cleaning
CFD Fluid Dynamics
Optimizing reactor hydraulics, flow distribution, and headloss before fabrication.
2011 Completed Title 22 Validation
2013 CDPH Approval
California Title 22 is a widely recognized standard for recycled water reuse in the U.S., requiring independent third-party validation.

Project References

Gwangju STP (KR)
750,000 m³/day (198.13 MGD)
Bonham Texas WWTP (US)
27,256 m³/day (7.2 MGD)
Suyeong STP (KR)
120,000 m³/day (31.7 MGD)
Pas Lajas, PR (US)
5,600 m³/day (1.5 MGD)
UV System Diagram
Click parts of a UV disinfection system to learn more.
1. System Control Panel (SCP) is the main control panel for the UV system. It uses a PLC, user interface, sensors, and communication devices to monitor and control system operation, including automatic sleeve wiping, water level control, and UV dose adjustment.
‍
Power Supply Panel (PSP) supplies power to the UV modules through electronic ballasts. It is typically installed near the SCP or close to the UV modules, depending on site conditions. One PSP typically serves one bank of UV modules.

Variable Output Electronic Ballast controls lamp output according to operating conditions, allowing the UV system to maintain the required UV dose while adjusting power consumption.
2. On-Line UV Transmittance Monitor (Optional) measures the UV transmittance (T10) of the treated water and sends the data to the SCP.

The system uses this information to automatically adjust lamp output according to changes in water quality.
3. UV Module contains multiple arc tubes are installed in the open channel.

Each arc tube is enclosed in a quartz sleeve to keep it separate from the water. The quartz sleeves are positioned parallel to the water flow.

The number of lamps and modules is selected based on flow rate, water quality, and site conditions.
4. Module Lift allows UV modules to be easily raised and lowered for inspection, cleaning, and maintenance.

It provides convenient access to the modules without requiring personnel to enter the open channel.
5. Ultrasonic Level Sensor continuously monitors the water level and sends real-time data to the SCP.

The system uses this information to control the Level Control System (LCS) and maintain the water level within the required range.
6. Level Switch detects when the water level rises above or falls below the set limits and triggers an alarm.
7. Level control System (LCS) controls the water level above the arc tubes to maintain proper UV operation.

It prevents excessive water levels that could allow untreated water to pass through the system, as well as low water levels that could expose the arc tubes above the water surface.
1
2
3
4
5
6
7

Horizontal-type Series

The NOL-HM Series offers flexible lamp configurations, with 4, 6, 8, 10, 12, 14, or 16 lamps per module, to accommodate varying water levels and flow conditions.
System General Features Neotec NOL-HM Series
Typical Application Small to Large Plants
Lamp Configuration Horizontal, Parallel to Flow
Module Configuration 2 to 16 Lamps Per Module
Water Level Control (Optional) ALC(Counterbalanced Level Control Gate) or Motorized Weir Gate or Fixed Weir
Module Material STS304 / STS316 / STS316L
Lamp Type Low Pressure, Amalgam / 320 Watts
Cleaning System Electric Motor-driven Automatic Wiper Mechanism with Limit Switches
Monitoring Device UV Intensity Monitor, Level Sensor
Operating Water Temperature +5°C- +45