UV AOP

Technical Series: NAOP

Industrial Water

(NAOP Series)

The Neotec UV Industrial AOP System uses medium-pressure UV lamps and advanced oxidation to break down persistent organic and chemical contaminants in industrial wastewater, ensuring advanced purification for discharge compliance or reuse.

The skid-type configuration integrates key treatment components into a compact unit, allowing for easier installation, operation, and maintenance.

Key Features

The Neotec UV Industrial Wastewater AOP System is designed for flexible operation and straightforward maintenance across a range of industrial wastewater applications.
‍
• Compact skid-mounted design for space-efficient installation
• Medium-pressure UV lamps with multiple power configurations
• Automatic operation with adjustable settings based on influent conditions
• Optional mechanical wiper and chemical cleaning systems for quartz sleeve maintenance

Applications

• Chemical Manufacturing
• Pharmaceuticals & Fine Chemicals
• Pesticides & Chemical Intermediates
• Electronics & Semiconductor Manufacturing
• Petrochemicals & Dyes
• Industrial Wastewater Treatment and Environmental Engineering

Photo-Fenton Process

The Fenton process is mainly used to treat industrial wastewater containing organic pollutants that are difficult to remove through conventional biological treatment.
Traditional Fenton
• Slow reaction rate
• Large installation footprint required
• Sludge generation due to excess ferric salts, leading to increased sludge disposal costs
UV-Fenton AOP
• Higher organic matter removal efficiency
• Reduced sludge generation due to lower catalyst dosage
• Reduced required ferric salt dosage

Project References

Nuclear Power Plant Wastewater Treatment (KR)
Photo-Fenton AOP for Oxalic Acid: 600 m³/day
(158,500 GPD)
Power Plant Condensate Wastewater (KR)
UV/SPS AOP for TOC Removal: 30 m³/day
(7,925 GPD)
Industrial Wastewater Treatment (CN)
Photo-Fenton AOP for DMSO: 24 m³/day
(6,340 GPD)

NAOP Series

Industrial UV-AOP System General Features
Lamp Type Medium Pressure
Input Power Per Lamp 4 kW, 8 kW, 10 kW, 12 kW, 24 kW
Cleaning System OMC or OMCC (Optional)
Chamber Material STS 316 / Nonmetal
Pressure Rating 145 psi (10 bar)
Max Water Temp 40°C (104°F)
Max Operating Temp 55°C (131°F)
Lamp Monitoring DVGW W294 UV sensor
Control Panel General Features
Material Painted Steel / STS 304
Controller Programmable Logic Controller (PLC)
Voltage / Frequency 360 ~ 480 ±10% / 50/60 Hz
Operating Temperature 0°C~50°C (32°F~120°F)
Location Indoor and Outdoor
Ballast Type Variable Output Electronic Ballast